3 Phase Isolating Transformer; Horizontal mounting versionDTL 2.0 - 5.0kVA according to IEC/DIN EN61558-2-4

overviewtechnical dataPDF data sheet

Typical applications

3 phase isolating transformer according to IEC/EN61558-2-4 for general applications, e.g. for providing electrical (galvanic) isolation according to VDE0700/EN60335 regulations or network supply transformer (e.g. TN network system).

Specifications

3 phase isolating transformer according to EN61558-2-4. protection class I ready. Due to innovative vacuum impregnation in polyester varnish, the noise level is extraordinary low. Screw terminals are contact proof according to VBG4.

Standard switching matrix: Yyn0 (max. typical star load of phase current: approx. 10%). Switching matrix: Please note the distinction between different voltages (e.g. phase voltage, line voltage).Final operation position must allow natural convection through coolant bore. For further information, don´t hesitate to contact us.

Transformer provides 2 loops for safe transportation or craning.

3 phase isolating transformer according to IEC/EN61558-2-4

natural convection through coolant bore

Voltage range / Input, Output 200 V … 550 V
Rated frequency 50/60 Hz
Power range 2,0kVA … 5,0kVA
Max. ambient temperature 40°C
UL-Insulation system (optional) OBJY2.E181051
Insulation class (IEC85) B 130°C
Fire protection class UL94HB (V-0 possible)
Open transformer – degree of protection IP00
Protection class (ready) I
  • Transformer completely vacuum impregnated
  • Standard switching matrix Yyn0 (typical star load approx. 10%)
  • Screw terminals contact proof according to BGV A3e
  • Ready for horizontal mounting including angle brackets
Rated power
kVA
Dimensions
approx. mm
Copper weight
KG
Total weight
KG


Size Type
A
B
C
D
E
F
2,0
290
120
200
258
160
9,0×13,0
6,30
19,30
3UI 120/51
DTL0200
2,5 290 110
220
258
176
9,0×13,0
7,50 20,50 3UI 132/46 DTL0250
3,2 290 125
220
258
176
9,0×13,0
8,20 25,50 3UI 132/60 DTL0320
4,0
330 125
250
298
200
9,0×13,0
12,20 31,80 3UI 150/52 DTL0400
4,5*
330 150
250
298
200
9,0×13,0
11,40
36,50
3UI 150/65 DTL0450
5,0*
360 142
280
322
224
9,0×13,0
17,00
44,00 3UI 168,58 DTL0500

Please note

* Version with lifting brackets for transportation.

3 Phase Isolating Transformers Circuits and Circuit Designs

3 phase isolation transformers offer various possibilities to connect PRIMARY and SECUNDARY winding.

Each design allows specific transformer characteristics. See the following table for preferred circuit designs.

  • Neutral wire “N“ or “n”. Percentage of neutral wire current allways refers to nominal current of phase conductor.
  • Please mind:

    • Secundary star circuit allows load on neutral wire.
    • Parallel connection of transformers must comply to following criteria:
      • Nominal voltage and rated frequency
      • Circuit design
      • Short circuit voltages
      • Ratio of rated loads should not extend 3:1