1AC Isolating transformer for use in IT networks / medical appliances according to VDE 0100-710MTS 3.15 - 8.0kVA according to IEC/EN61558-2-15

Typical applications

Isolating transformer for use in IT networks according to VDE 0100-710; device for medical appliances and health care environment. Primary-/ Secundary voltages: 230 / 230 V.

Specifications

• 1 phase isolating transformer according to VDE 0100-710 requirements.
• Construction according to protection class II; enhanced insulation (test voltage 4 KV between PRI / SEC shielding)
• Static shielded winding between Primary- and Secundary winding; directed to insulated feeder clamp.
• Thermo switch in PRI winding > thermal overload signal, directed to feeder clamps
• Short circuit voltage <3%
• Open-circuit operation current <3%
• Inrush current < 8 x Inenn
• Secundary winding provides central tap for insulation monitoring (Note: Symmetric connection design is recommended)
• PRI / SEC feeder clamps located in a separate case according to VDE0606
• DIN connections with strain-relief

1 phase isolating transformer (IT networks)

vertical design version – according to VDE0107

Primary voltage	230V
Secundary voltage	230V mit Mittelanzapfung für Isolationsüberwachung
Rated frequency	50/60 Hz
Power range	3,15kVA … 8,0kVA
Max. ambient temperature	50°C
UL-Insulation system(optional)	OBJY2.E181051
Insulation class (IEC85)	B 130°C
Fire protection class	UL94V-0
Open transformer – degree of protection	IP00
Protection class (ready)	I
circuit points	Klemmen für Primär- und Sekundärwicklung sind getrennt in Klemmkästen gemäß VDE0606 Die statische Schirmwicklung ist isoliert auf Klemmen gelegt

• Construction according to protection class II
• Static shielded winding (insulated to fasteners)
• Thermo switch in primary winding
• Transformer completely vacuum impregnated
• PRI / SEC feeder clamps located in a separate case according to VDE0606
• Vertical fixing via mounting angles

To the Data Sheet